This is a bilingual snapshot page saved by the user at 2025-5-2 24:40 for https://app.immersivetranslate.com/word/, provided with bilingual support by Immersive Translate. Learn how to save?

Material Safety Data Sheet (MSDS)

1. Chemical Product

Product Name:‌ Sodium Calcium Silicate Glassware (Example: Glass Cup)

2. Composition/Information on Ingredients

Component Name

CAS Number

Content (%)

Silicon Dioxide (SiO₂)

14808-60-7

≥70%

Sodium oxide (Na₂O)

1313-59-3

12-15%

Calcium oxide (CaO)

1305-78-8

8-12%

Other oxides

-

≤5%

Note: No coating, ink, or other chemicals added

3. Hazard Overview

Physical Hazards:

Sharp fragments may be produced after breakage, posing a risk of cuts

Trace dust may be released during high-temperature processing (protective equipment is recommended)

Health Hazards:

Non-toxic and harmless under normal conditions, with no carcinogenic or teratogenic risks

Inhalation of glass dust may irritate the respiratory tract (protection is required for long-term exposure)

Environmental Hazards:

Undecomposed waste glass may cause physical pollution to the soil

4. First Aid Measures

Skin Contact:‌ Rinse with clean water, remove debris, then disinfect and bandage‌

Inhalation of Dust:‌ Move to fresh air, seek medical attention if discomfort persists‌

Eye Contact:‌ Immediately rinse with clean water for at least 15 minutes, seek medical examination‌

5. Firefighting Measures

Suitable Extinguishing Agents:‌ Dry powder, carbon dioxide, sand‌

Special Risks:‌ High-temperature molten glass may cause burns; heat-resistant protective gear is required‌

6. Emergency Spill Response

Small-scale breakage:‌ Wear gloves and goggles, use a hard tool to clean up fragments and seal for disposal‌

Dust leakage:‌ Wet cleaning, avoid dust dispersion‌

7. Handling and Storage

Operation Recommendations:

Avoid violent impact or sudden cooling and heating

Use ventilation equipment to reduce dust during processing

Storage Conditions:‌ Dry environment, isolated from corrosive chemicals‌

8. Exposure Controls/Personal Protection

Respiratory Protection:‌ Use N95 mask in dusty environments‌

Hand Protection:‌ Cut-resistant gloves‌

Eye Protection:‌ Goggles or face shield‌

9. Physical and Chemical Properties

Item

Numerical Value

Appearance

Transparent/Semi-transparent Solid

Density

2.4-2.8 g/cm³

Melting Point

About 600-800℃ (Softening Point)

Water Solubility

Insoluble

10. Stability and Reactivity

Stability:‌ Stable at room temperature, does not react with water or acids (except hydrofluoric acid)

Avoid contact conditions:‌ Hydrofluoric acid, strong alkaline solutions‌

11. Toxicological Information

Acute toxicity:‌ No data (no toxicity with normal exposure)‌

Chronic effects:‌ Long-term inhalation of dust may cause silicosis (exposure control required)‌

12. Ecological Information

Biodegradability:‌ Non-biodegradable, requires recycling treatment‌

Environmental Mobility:‌ Fragments may cause physical harm to soil and aquatic organisms‌

13. Disposal Considerations

Disposal Method:‌ Recycle according to local regulations, do not dispose of arbitrarily by landfill‌

14. Transport Information

UN Number (UN No.):‌ Not regulated‌

Packaging Category:‌ Class III (use shatterproof packaging materials)‌

15. Regulatory Information

China:‌ GB/T 16483-2008‌

International:‌ ISO 11014-1, REACH (EU)‌

16. Other Information

Disclaimer:‌ This report is prepared based on current scientific knowledge, and users need to make judgments based on actual circumstances.‌‌