1. Chemicals and Company Logos Chemical Name: Aluminum Alloy Cutting Fluid Company Name: Suzhou Wuwangben New Material Technology Co., Ltd. Address: No. 289, Qianjin East Road, Kunshan Development Zone, Suzhou City, Jiangsu Province Postal Code: 215300 Fax number: 0512-57850191 Emergency telephone number: 0532-83889090
II. Hazard Overview Hazard Classification: Not dangerous goods. Explosion hazard: non-flammable liquid. Routes of entry: inhalation, ingestion, and percutaneous absorption. Health Hazards: Prolonged contact with skin may cause dermatitis. Environmental hazards: No data available.
3. Ingredients/Composition Information Single product mixture: Roughly composed of:
The exact ratio is a trade secret and cannot be provided in detail at the moment. The above product information complies with safety and health management regulations. IV. First aid measures
Eye contact: Rinse immediately with clean water and seek medical attention from an ophthalmologist if necessary. Skin contact: Take off contaminated clothing and wash with clean water. Inhalation: Move to fresh air and seek medical attention if necessary.
Cannibalism: Drink plenty of water, induce vomiting, spit out the food, and seek medical attention if necessary.
5. Firefighting measures Flammability: Flame-retardant liquid Combustion (decomposition) products: water, carbon dioxide, nitrogen oxides, chlorides Fire extinguishing tips: Spray the fire extinguishing agent above the flame to extinguish the fire
VI. Emergency treatment of leakage
Emergency treatment: In case of large-scale leakage, quickly evacuate the leaked contaminated area, strictly limit the number of people leaving, cut off nearby fire sources, cut off the source of leakage as much as possible, use soil to block the leakage to prevent it from spreading, prevent the leaked material from entering the sewer and seeping into the soil, and use pumps and empty containers for recovery.
In case of a small amount of leakage, use soil, sawdust, waste cotton yarn, etc. to absorb the leaked material, and flush with plenty of water. Emergency personnel should wear work clothes, oil-resistant gloves and other labor protection supplies when operating.
VII. Handling and Storage
Operation precautions: Avoid contact with eyes and skin, wear protective glasses and gloves during operation. Inhalation of vapor can cause nausea, so operate in a ventilated place and wear respiratory protection to prevent inhalation of vapor. Avoid contact with sparks, open flames, hot objects and strong oxidizers during operation.
Storage precautions: Store in a sealed container, 0-40^(@)C0-40^{\circ} \mathrm{C} store indoors, avoid extreme low temperatures, exposure to sunlight and rain, away from heat and fire sources, and store separately from oxidants and acids.
Precautions for handling: Avoid falling and collision.
8. Exposure Control and Personal Protection Maximum allowable concentration: No standard Testing method: No regulations
Engineering Controls: Provide adequate local ventilation, shower and eyewash equipment. Respiratory protection: Use respiratory protection if necessary. Body protection: Wear work clothes. Hand protection: Wear oil-resistant gloves when prolonged and repeated contact is required.
Eye protection: Wear safety glasses when foam splashes.
Other protection: Open flames and eating are prohibited in the workplace. Take a shower after work and wash your work clothes before use.
IX. Physical and chemical properties Appearance (original solution): yellow or brown liquid Odor: odorless
Appearance (5\% dilution): milky white or milky white translucent liquid Foam performance Room temperature ml:≤2\mathrm{ml}: \leq 2
Density (20^(@)C,g//cm^(3)):0.8-1.2\left(20^{\circ} \mathrm{C}, \mathrm{g} / \mathrm{cm}^{3}\right): 0.8-1.2 Refractive index (5\% dilution): 1.0-1.5
pH value (5\% dilution): 7.5-9.5 Explosion limit: No relevant data
10. Stability and Reactivity Stability: Stable Hazardous Polymerization: No polymerization Incompatible materials: oxidizing agents, acids
XI. Toxicology Information Acute toxicity ( LD_(50)\mathrm{LD}_{50} , rat): No relevant data Irritation: Irritating to eyes. Long-term and repeated contact with the skin can cause skin degreasing, cracking and dermatitis.
12. Ecological Information Ecotoxicity: No data available Persistence/degradability: No information available Biodegradability: No information available Other adverse effects: No information available Mobility: No information available
13. Waste Disposal
Waste nature: Hazardous waste, category HW09 in the national hazardous waste list.
Waste disposal method: handled by specialized waste liquid treatment personnel, or handed over to a qualified waste disposal unit for disposal.
Disposal precautions: When welding, stamping, cutting, etc., be aware that the residual liquid in the discarded container may boil over. Avoid contact between waste liquid and soil and water.
14. Transportation Information Hazard classification and number: General chemical safety label: None
Packing mark: no special mark Packing method: 200L steel drum or 20L plastic drum
Transportation precautions: Avoid collision and falling, and take necessary shock-absorbing measures for long-distance transportation
15. Regulatory Information Water Pollution Prevention and Control Law of the People's Republic of China: Prohibition of discharging oil into water bodies Marine Environmental Protection Law of the People's Republic of China: Prohibition of discharging oil into the sea Classification and marking of commonly used hazardous chemicals: Not applicable Regulations on safe use of chemicals in the workplace: Applicable
16. Other Information Reference: Suzhou Wuwangben New Material Technology Co., Ltd. Form filling (modification) time: August 26, 2021 Fill in the department: Technical Department