There is also an option to use regular webcams if they feature a standard camera mount thread in their base. 还有一个选项可以使用普通网络摄像头,如果它们的底座配备了标准相机安装螺纹。
Winmau Plasma Light setup
Winmau Plasma Light 设置
If you have a Winmau Plamsa Light setup at home, you can simply print three camera arms.
Alternatively, you can also print new feet for the Winmau Plasma Light.
A finished Winmau Plasma Light setup may look like this. 如果您在家里有一个 Winmau Plamsa Light 设置,您可以简单地打印三个摄像头臂。或者,您也可以为 Winmau Plasma Light 打印新的支脚。一个完成的 Winmau Plasma Light 设置可能看起来像这样。
Camera Arms
相机臂
Which camera arms you need depends on the type of camera that you want to mount.
There are multiple options. 你需要哪种相机支架取决于你想安装的相机类型。有多种选择。
32x32mm modules with 28x28mm holes
32x32 毫米模块,带有 28x28 毫米的孔
This is the original design of the Autodarts arms.
It is only compatible with 32x32mm modules. 这是 Autodarts 臂的原始设计。它只兼容 32x32mm 模块。
To make the design a little bit more flexible, there is also a modular version of the arm that does not have a fixed head. 为了使设计更加灵活,还有一个模块化版本的手臂,没有固定的头部。
If you have purchased the Moertek MC920 webcams, you can disassemble them and house their modules in this modular head. 如果您已经购买了 Moertek MC920 网络摄像头,您可以将它们拆卸并将其模块安装在这个模块化头部中。
For the Winmau Plasma Light, there are also alternative feet that you can 3D-print.
The feet feature channels for the cables of the camera modules.
It makes for a neater setup. 对于 Winmau Plasma Light,您还可以打印 3D 替代脚。 这些脚具有摄像头模块电缆的通道。 这样可以使设置更整洁。
You will have to purchase the following hardware: 您将需要购买以下硬件:
1x Winmau Plasma Light 1x Winmau 等离子灯
3x compatible camera modules 3x 兼容相机模块
You will need to print the following models: 您需要打印以下模型:
3x arms 3 只手臂
3x arm lids 3x 手臂盖
3x modular heads (when using modular arm) 3 个模块化头部(使用模块化手臂时)
3x modular head lids (when using modular arm) 3 个模块化头盖(使用模块化手臂时)
3x feet 3x 英尺
3x feet lids 3x 英尺盖子
Screws, nuts, and washers: 螺丝、螺母和垫圈:
12x DIN 4762 M2x10 screws (mounting camera modules inside the arm or modular head) 12x DIN 4762 M2x10 螺丝(安装摄像头模块在手臂内或模块化头部)
6x DIN 4762 M4x20 screws (mounting arm and feet to the ring) 6x DIN 4762 M4x20 螺丝(安装臂和脚到环)
6x DIN 4762 M4x12 screws (mounting head to the modular arm) 6x DIN 4762 M4x12 螺丝(将安装头安装到模块化臂)
12x DIN 9021 M4 washers 12x DIN 9021 M4 垫圈
12x DIN 4032 M4 nuts 12 个 DIN 4032 M4 型螺母
12x DIN 4762 M3x8 screws (mounting the lids) 12x DIN 4762 M3x8 螺丝(安装盖子)
3x DIN 7997 5x40 screws (mounting the feet to the wall) 3x DIN 7997 5x40 螺丝(将脚安装到墙上)
Lars’ Autodarts Ring
拉斯的自动飞镖环
@Lars has also provided a complete 3D LED ring that you can entirely 3D-print.
The design is completely compatible with all arms mentioned above, so you can combine this ring with any of the arms, including the modular arm.
The feet for the Winmau Plasma Light from above are not compatible with this ring.
Make sure to print the feet that are linked further down.
A complete setup may look like this. @Lars 也提供了一个完整的 3D LED 灯环,您可以完全 3D 打印。该设计与上述所有臂部完全兼容,因此您可以将此灯环与任何臂部结合使用,包括模块化臂部。从上面看,Winmau Plasma Light 的底座 不 与此灯环兼容。请确保打印下方链接的底座。一个完整的设置可能看起来像这样。
Pieces
碎片
In addition to the arms from above, you will need to print the pieces that make up the ring. 除了从上面的手臂之外,您还需要打印组成戒指的零件。