激光清洗除锈(专用)产品介绍及报价
Laser cleaning and rust removal (special) product introduction and quotation
产品简介
Product Introduction
激光清洗是一项全新的无接触式表面清洁技术,该技术主要通过低功率高能量密度的脉冲激光束作用于工件表面,使表面的污渍、氧化物或涂层瞬间蒸发气化或热膨胀而脱离,从而实现表面清洗净化的效果。与传统方式相比,具有环保性、无研磨、无热效应等优势,在清洗精密工件上具有独特优势。
Laser cleaning is a new non-contact surface cleaning technology, which mainly uses a pulsed laser beam with low power and high energy density to act on the surface of the workpiece, so that the stains, oxides or coatings on the surface are instantly vaporized and vaporized or thermally expanded and separated, so as to achieve the effect of surface cleaning and purification. Compared with the traditional method, it has the advantages of environmental protection, no grinding, no thermal effect, etc., and has unique advantages in cleaning precision workpieces.
我厂激光清洗机拥有先进的工艺,具有人性化设计、体积小巧、操作灵活、低能耗、环保等特点,具备一定的实用性和操作性。客户可以通过软件,预设清洗模式,不用调节参数,即可直接切换模式进行作业,开始无化学试剂、无介质、无尘、无水的清洗。通过自动对焦,贴合曲面清洗,清除物件表面树脂、污渍、锈蚀、涂层、油漆等,清洁度较高。
Our laser cleaning machine has advanced technology, with humanized design, small size, flexible operation, low energy consumption, environmental protection and other characteristics, with a certain practicability and operability. Customers can preset the cleaning mode through the software, and can directly switch the mode to operate without adjusting the parameters, and start the cleaning without chemical reagents, media, dust and water. Through autofocus, the surface of the surface is cleaned to remove resin, stains, rust, coatings, paints, etc., and the cleanliness is high.
绿色环保--无化学试剂、无溶解剂、噪音小
Green and environmental protection - no chemical reagents, no solvents, low noise
作业方便--无接触式加工、便携式,可移动作业
Convenient operation - non-contact processing, portable, mobile operation
无损伤—仅仅清除表面污染物
Non-damaging—only surface contaminants are removed
易于自动化—方便集成使用、高效率
Easy to automate—easy to integrate and efficient
选择性作业—局部区域定点清洗
Selective operation – localized spot cleaning
激光器技术参数
Laser technical parameters
参数名称 | 参数值 | 单位 |
中心波长 | 1060- 1080 | nm |
光谱宽度@3dB | <5 | nm |
最大脉冲能量 | 1.5@135kHz | mJ |
输出功率 | 200 | W |
功率调节范围 | 0- 100 | % |
频率调节范围 | 5-200 | kHz |
开/关光响应时间 | <20 | μs |
脉冲宽度 | 150- 190@135kHz | ns |
输出功率不稳定度 | <5 | % |
光束质量 M2 | <1.8 | / |
偏振方向 | 随机 | / |
是否抗高反 | 是 | / |
指示(红)光功率 | 0.3-2 | mW |
光斑直径(4σ) | 5-7 | mm |
输出铠缆长度 | 5 | m |
电学配置
Electrical configuration
参数名称 | 参数值 | 单位 |
供给电压 | 48 | VDC |
工作电流 | <16 | A |
功耗 | <748 | W |
推荐电源功率 | ≥1 | kW |
环境要求
Environmental requirements
参数名称 | 参数值 | 单位 |
工作温度 | 0 - 40 | ℃ |
存储温度 | - 10 - 60 | ℃ |
冷却方式 | 风冷 | / |
产品参考图片
Product reference image
激光清洗控制器为连续激光器和脉冲激光器应用与激光清洗的一种专用控制器,
The laser cleaning controller is a special controller for continuous laser and pulsed laser application and laser cleaning.
带有各种激光器控制,振镜控制,外接 PLC 等控制输入的多功能控制器。清洗速度可以达到150mm 宽幅 6 米/分钟。
Multi-function controller with various laser control, galvanometer control, external PLC and other control inputs. Cleaning speeds of up to 150mm and widths of 6 m/min can be achieved.
产品规格及性能
Product Specifications and Performance
设备型号 | DH-CL200M |
平均功率 | 200W |
清洗头重量 | 标准头:1.8Kg,防抖头:2.0Kg |
扫描宽度 | 5mm~120mm连续可调 |
冷却方式 | 水冷 |
清洗油漆/浮锈(20μm) | 8.0m2/h |
清洗油污(20μm) | 9.0m2/h |
清洗钛合金/不锈钢氧化物 | 8.0m2/h |
清洗铝合金氧化膜 | 6.0m2/h |
产品价格
The price of the product
品 名 | 规 格 | 数 量 (台) | 单 价 (含税) | 备注 |
激光清洗机 DH-CL200M | 200W | 1 | 54200 | 质保2年 |
上述价格含增值税,含普通包装国内普通物流。
The above prices include VAT, including ordinary packaging for domestic general logistics.