Configuration

Configuration Options-Listed by Topic

Configuration options sorted by topic.
System Processing-General Info

daemon	setup_mode	pid_file	log_file
log_level	log_type	native_language	target_dir
device_name	device_id	camera	config_dir
device_tmo	watchdog_tmo	watchdog_kill	pause

Devices-General Info

v4l2_device	v4l2_params	libcam_device	libcam_params
netcam_url	netcam_params	netcam_high_url	netcam_high_params
netcam_proxy

Image Processing-General Info

width	height	framerate	text_event
rotate	flip_axis	locate_motion_mode	locate_motion_style
text_left	text_right	text_changes	text_scale

Motion Detection-General Info

emulate_motion	threshold	threshold_maximum	threshold_tune
threshold_sdevx	threshold_sdevy	threshold_sdevxy	threshold_tune
threshold_ratio_change	secondary_method	secondary_params	noise_level
noise_tune	despeckle_filter	area_detect	mask_file
mask_privacy	smart_mask_speed	lightswitch_percent	lightswitch_frames
minimum_motion_frames	event_gap	pre_capture	post_capture
static_object_time

Script Execution-General Info

on_event_start	on_event_end	on_picture_save	on_motion_detected
on_area_detected	on_movie_start	on_movie_end	on_camera_lost
on_camera_found	on_secondary_detect	on_action_user	on_sound_alert

Pictures-General Info

picture_output	picture_output_motion	picture_type	picture_quality
picture_exif	picture_filename	snapshot_interval	snapshot_filename

Movies-General Info

movie_output	movie_output_motion	movie_max_time	movie_bps
movie_quality	movie_container	movie_retain	movie_passthrough
movie_filename	movie_extpipe_use	movie_extpipe	timelapse_filename
timelapse_interval	timelapse_mode	timelapse_container	timelapse_fps

Pipes-General Info

video_pipe

video_pipe_motion

Webcontrol-General Info

webcontrol_port	webcontrol_port2	webcontrol_ipv6	webcontrol_localhost
webcontrol_parms	webcontrol_interface	webcontrol_auth_method	webcontrol_authentication
webcontrol_tls	webcontrol_cert	webcontrol_key	webcontrol_headers
webcontrol_actions	webcontrol_html	webcontrol_base_path	webcontrol_lock_attempts
webcontrol_lock_minutes	webcontrol_lock_script

Live Stream-General Info

stream_preview_scale	stream_preview_newline	stream_preview_method	stream_preview_ptz
stream_quality	stream_grey	stream_maxrate	stream_motion
stream_scan_time	stream_scan_scale

Database-General Info

database_type	database_dbname	database_host	database_port
database_user	database_password	database_busy_timeout	sql_event_end
sql_event_start	sql_movie_end	sql_movie_start	sql_pic_save

Tracking-General Info

ptz_auto_track	ptz_wait	ptz_move_track	ptz_pan_left
ptz_pan_right	ptz_tilt_up	ptz_tilt_down	ptz_zoom_in
ptz_zoom_out

Sound Detection

snd_device	snd_params	snd_alerts	snd_window
snd_show

Configuration Options-Detail Descriptions

The following section provides detailed descriptions of each of the configuration options.

Conversion Specifiers

%Y	year	%m	month	%d	day
%H	hour	%M	minute	%S	second
%T	HH:MM:SS	%v	event	%q	frame number
%t	device id number	%D	changed pixels	%N	noise level
%w	width of the image	%h	height of the image	%i	width of motion area
%J	height of motion area	%K	X coordinates of motion center	%L	Y coordinates of motion center
%C	value defined by text_event	%f	filename with full path	%n	number indicating filetype
%o	threshold	%Q	Number of labels from despeckle	%{eventid}	Unique identifier for event (cam id + date/time)
%$	device name	%{fps}	current frames per second	%{host}	name of computer running MotionPlus
%{ver}	version of MotionPlus	%{trig_nbr}	sound alert number that was triggered	%{trig_nm}	sound alert name that was triggered
%{trig_freq}	frequency that triggered the sound alert

The use of quotation marks around string is permitted. In addition to the above, the conversion specifiers include the same options as for the C function strftime (3).

System Processing

daemon

• Values: on, off | Default: off
Run in daemon mode. When running MotionPlus under systemd specify as off.

setup_mode

• Values: on, off | Default: off
Run in setup mode and provide lots of messages related to images processed.

pid_file

• Values: String | Default: Not defined
The full path and name of the process id file.

log_file

• Values: String | Default: Not defined
The full path and name for the log file. When not specified, use syslog.

log_level

• Values: 1 - 9 | Default: 6
Verbosity level(EMR, ALR, CRT, ERR, WRN, NTC, INF, DBG, ALL) of messages.

log_type

• Values: COR, STR, ENC, NET, DBL, EVT, TRK, VID, ALL | Default: ALL
The component for which to log messages.

native_language

• Values: on, off | Default: on
Enable native language messages.

target_dir

• Values: String | Default: current directory
The full path for the target directory for pictures, snapshots, movies, etc. to be saved.

device_name

• Values: String | Default: Not defined
The device name to be used in the format specifiers and web interface.

device_id

• Values: 1 - 32000 | Default: The sequence that the device file is read
Unique numeric id for the device.

camera

• Values: String | Default: Not defined
The full path and file name with the configuration parameters for the individual camera.

config_dir

• Values: String | Default: Not defined
Directory containing individual device configuration files. Any files ending in '.conf' in the directory will be read as a device configuration file.

device_tmo

• Values: Integer | Default: 30
Number of seconds that elapse before the device is deemed to be lost.

watchdog_tmo

• Values: Integer | Default: 30
Number of seconds that elapse before a camera is deemed to be unresponsive and MotionPlus triggers a watchdog timeout and begins to force the camera to shut down.

watchdog_kill

• Values: Integer | Default: 10
Number of seconds that elapse after the watchdog_tmo that MotionPlus waits until the kill processes begin to force the camera to shut down.

pause

• Values: Boolean | Default: false
Pause detection at start up.

Devices

v4l2_device

• Values: String | Default: Not Defined
The v4l2 device to be used for capturing.

v4l2_params

• Values: String | Default: Not Defined
Comma separated list of configuration parameters (aka controls) for the v4l2 device.

The configuration parameters for v4l2_params are specified by name or ID. They may also be enclosed in double quotes. Review the MotionPlus log with log_level 8 to see the options that are applicable to the device. The following is a sample output from the log and examples of how to specify the parameters
• Log: [INF][VID][01:ml01:cam01] v4l2_ctrls_log: ID09963776 : Brightness : 0 to 255
• Example 1:v4l2_params Brightness=130,palette=15
• Example 2:v4l2_params "Brightness"=130,palette=15
• Example 3:v4l2_params ID09963776=130,palette=15
Additional MotionPlus specific options for v4l2_params are listed below.

palette

• Values: 0 - 20 | Default: 17
Preferred color palette for MotionPlus to use for the device. See table below for the meaning of each parameter number value.

V4l2 Option	FOURCC	palette option
V4L2_PIX_FMT_SN9C10X	S910	0
V4L2_PIX_FMT_SBGGR16	BYR2	1
V4L2_PIX_FMT_SBGGR8	BA81	2
V4L2_PIX_FMT_SPCA561	S561	3
V4L2_PIX_FMT_SGBRG8	GBRG	4
V4L2_PIX_FMT_SGRBG8	GRBG	5
V4L2_PIX_FMT_PAC207	P207	6
V4L2_PIX_FMT_PJPG	PJPG	7
V4L2_PIX_FMT_MJPEG	MJPG	8
V4L2_PIX_FMT_JPEG	JPEG	9
V4L2_PIX_FMT_RGB24	RGB3	10
V4L2_PIX_FMT_SPCA501	S501	11
V4L2_PIX_FMT_SPCA505	S505	12
V4L2_PIX_FMT_SPCA508	S508	13
V4L2_PIX_FMT_UYVY	UYVY	14
V4L2_PIX_FMT_YUYV	YUYV	15
V4L2_PIX_FMT_YUV422P	422P	16
V4L2_PIX_FMT_YUV420	YU12	17
V4L2_PIX_FMT_Y10	Y10	18
V4L2_PIX_FMT_Y12	Y12	19
V4L2_PIX_FMT_GREY	GREY	20

input

• Values: Integer | Default: -1
Input channel for the v4l2 device. Use -1 for web cams.

norm

• Values: 0-3: | Default: 0
The TV norm to use for the device (PAL, NTSC, SECCAM, PAL-BW)

frequency

• Values: Long | Default: 0
The tuner frequency to use for the device.

params_file

• Values: String | Default: Not Defined
Full path and file name for a file containing the params listed one per line.

libcam_device

• Values: String | Default: Not Defined
The libcamera device. The value of 'camera0' is the only currently supported device.

libcam_params

• Values: String | Default: Not Defined
Comma separated list of configuration parameters (aka controls) for the libcamera device.

Transform(string)

(These are libcamera transform and rotate options and may not provide result you anticipate.)
• Identity
• Rot0
• HFlip
• VFlip
• HVFlip
• Rot180
• Transpose(not currently supported by libcamera)
• Rot270(not currently supported by libcamera)
• Rot90(not currently supported by libcamera)
• Rot180Transpose

AeEnable(bool)

AeLocked(bool)

AeMeteringMode(int)

• MeteringCentreWeighted = 0
• MeteringSpot = 1
• MeteringMatrix = 2
• MeteringCustom = 3

AeConstraintMode(int)

• ConstraintNormal = 0
• ConstraintHighlight = 1
• ConstraintShadows = 2
• ConstraintCustom = 3

AeExposureMode(int)

• ExposureNormal = 0
• ExposureShort = 1
• ExposureLong = 2
• ExposureCustom = 3

ExposureValue(float)

ExposureTime(int)

AnalogueGain(float)

Brightness(float)

Contrast(float)

Lux(float)

AwbEnable(bool)

AwbMode(int)

• AwbAuto = 0
• AwbIncandescent = 1
• AwbTungsten = 2
• AwbFluorescent = 3
• AwbIndoor = 4
• AwbDaylight = 5
• AwbCloudy = 6
• AwbCustom = 7

AwbLocked(bool)

ColourGains(Pipe delimited)

• Red | Blue

ColourTemperature(int)

Saturation(float)

SensorBlackLevels(Pipe delimited)

• var1|var2|var3|var4

Sharpness(float)

FocusFoM(int)

ColourCorrectionMatrix(Pipe delimited)

• var1|var2|var3|var4|var5|var6|var7|var8|var9

ScalerCrop(Pipe delimited)

• x|y|height|width

DigitalGain(float)

FrameDuration(int)

FrameDurationLimits(Pipe delimited)

• min|max

SensorTemperature(float)

SensorTimestamp(int)

AfMode(int)

• AfModeManual = 0
• AfModeAuto = 1
• AfModeContinuous = 2

AfRange(0-2)

• AfRangeNormal = 0
• AfRangeMacro = 1
• AfRangeFull = 2

AfSpeed(int)

• AfSpeedNormal = 0
• AfSpeedFast = 1

AfMetering(int)

• AfMeteringAuto = 0
• AfMeteringWindows = 1

AfWindows(Pipe delimited)

• x|y|height|width

AfTrigger(int)

• AfTriggerStart = 0
• AfTriggerCancel = 1

AfPause(int)

• AfPauseImmediate = 0
• AfPauseDeferred = 1
• AfPauseResume = 2

LensPosition(float)

AfState(int)

• AfStateIdle = 0
• AfStateScanning = 1
• AfStateFocused = 2
• AfStateFailed = 3

AfPauseState(int)

• AfPauseStateRunning = 0
• AfPauseStatePausing = 1
• AfPauseStatePaused = 2

AePrecaptureTrigger(int)

• AePrecaptureTriggerIdle = 0
• AePrecaptureTriggerStart = 1
• AePrecaptureTriggerCancel = 2

NoiseReductionMode(int)

• NoiseReductionModeOff = 0
• NoiseReductionModeFast = 1
• NoiseReductionModeHighQuality = 2
• NoiseReductionModeMinimal = 3
• NoiseReductionModeZSL = 4

ColorCorrectionAberrationMode(int)

• ColorCorrectionAberrationOff = 0
• ColorCorrectionAberrationFast = 1
• ColorCorrectionAberrationHighQuality = 2

AeState(int)

• AeStateSearching = 1
• AeStateConverged = 2
• AeStateLocked = 3
• AeStateFlashRequired = 4
• AeStatePrecapture = 5

AwbState(int)

• AwbStateInactive = 0
• AwbStateSearching = 1
• AwbConverged = 2
• AwbLocked = 3

SensorRollingShutterSkew(int)

LensShadingMapMode(int)

• LensShadingMapModeOff = 0
• LensShadingMapModeOn = 1

PipelineDepth(int)

MaxLatency(int)

TestPatternMode(int)

• TestPatternModeOff = 0
• TestPatternModeSolidColor = 1
• TestPatternModeColorBars = 2
• TestPatternModeColorBarsFadeToGray = 3
• TestPatternModePn9 = 4
• TestPatternModeCustom1 = 256

netcam_url

• Values: String | Default: Not defined
URL associated with the network camera.

netcam_params

• Values: String | Default: Not Defined
Comma separated list of configuration parameters. Format is: option=value,option2=value2

MotionPlus uses the ffmpeg libraries to process network cameras. This option is a comma separated list of the ffmpeg options for the camera. In addition to the ffmpeg options, MotionPlus includes the following additional options.

capture_rate

The number of frames per second to capture from the camera. This option should be slightly higher than the FPS that the camera is sending image. Users can also specify the capture_rate as pts. When using pts as the capture_rate MotionPlus will sync the timing of the capture to match between the clock and the presentation time stamps sent from the camera.

decoder

The ffmpeg hardware decoder to use. Note that not all of the hardware decoders provided by ffmpeg are available. The only hardware decoders are those that do not require customization of libary usage. The ffmpeg libaries on the computer must usually be built from source in order to enable hardware decoding.

params_file

• Values: String | Default: Not Defined
Full path and file name for a file containing the params listed one per line.

netcam_high_url

• Values: String | Default: Not defined
URL associated with the high resolution stream of the network camera. This option is typically used with the movie_passthrough to minimize CPU usage. The netcam_url specifies a low resolution stream which is decoded and processed and the movies are saved directly from the data provided from the netcam_high_url without decoding or processing it.

netcam_high_params

• Values: String | Default: Not Defined
Comma separated list of configuration parameters. Format is: option=value,option2=value2

MotionPlus uses the ffmpeg libraries to process network cameras. This option is a comma separated list of the ffmpeg options for the stream specified by netcam_high_url. In addition to the ffmpeg options, MotionPlus includes the following additional options.

capture_rate

The number of frames per second to capture from the camera. This option should be slightly higher than the FPS that the camera is sending images. Users can also specify the capture_rate as pts. When using pts as the capture_rate MotionPlus will sync the timing of the capture to match between the clock and the presentation time stamps sent from the camera.

params_file

• Values: String | Default: Not Defined
Full path and file name for a file containing the params listed one per line.

netcam_userpass

• Values: String | Default: Not defined
Username and password for the network camera specified as username:password.

Image Processing

width

• Values: Integer | Default: 640
The width of the image in pixels. Must be a multiple of 8.

height

• Values: Integer | Default: 480
The height of the image in pixels. Must be a multiple of 8.

framerate

• Values: 2 - 100 | Default: 15
The number of frames to be processed per second for motion detection.

rotate

• Values: 0, 90, 180, 270 | Default: 0
Rotate image the given number of degrees.

flip_axis

• Values: none, vertical, horizontal | Default: none
Flip the image according to specified axis.

locate_motion_mode

• Values: on, off, preview | Default: off
Locate and draw around/on the moving object. Preview only applies to pictures.

locate_motion_style

• Values: box, redbox, cross, redcross | Default: box
Set the look and style of the locate mode.

text_left

• Values: String | Default: Not defined
User defined text overlaid in the lower left corner.

text_right

• Values: String | Default: %Y-%m-%d\\n%T
User defined text overlaid in the lower right corner.

text_changes

• Values: on, off | Default: off
Show the number of pixels that changed in the upper right corner.

text_scale

• Values: 1 - 10 | Default: 1
Scale factor for text drawn on images.

text_event

• Values: String | Default: %Y%m%d%H%M%S
Creates conversion specifier %C

Motion Detection

emulate_motion

• Values: on, off | Default: off
Always save images even if there was no motion

threshold

• Values: Integer | Default: 1500
Minimum number of changed pixels that triggers an event.

threshold_maximum

• Values: Integer | Default: 0
Maximum number of changed pixels that triggers an event. If the number of changed pixels is over the threshold maximum, no event is triggered. A value of zero disables threshold_maximum.

threshold_tune

• Values: on, off | Default: off
Continuously adjust the threshold for triggering an event.

threshold_sdevx

• Values: Integer | Default: 0
The maximum standard deviation of the changed pixels in the x (width) axis.

threshold_sdevy

• Values: Integer | Default: 0
The maximum standard deviation of the changed pixels in the y (height) axis.

threshold_sdevxy

• Values: Integer | Default: 0
The maximum standard deviation of the changed pixels in the x (width) and y(height) axis.

threshold_ratio

• Values: Integer | Default:
The maximum ratio comparing the pixels that went white to black and vice versa.

threshold_ratio_change

• Values: Integer | Default:
The minimum change in the ratio to trigger a event.

secondary_method

• Values: haar, hog, dnn | Default: Not Defined
The secondary detection method.

secondary_params

• Values: String | Default: Not Defined
Comma separated list of configuration parameters for the camera. Format is option=value,option2=value2

This option is a comma separated list of the secondary detection model options. In addition to the options for each of the models, MotionPlus includes the following additional options.

frame_interval

• Values: Integer | Default: 5
The interval of images between processing using the secondary method. This works in conjunction with the framerate. For example, a frame_interval of 5 with a framerate of 30 means secondary processing will be at 6 fps while a frame_interval of 60 would have secondary processing every other second.

model_file

• Values: String | Default: Not Defined
Full path and file name for the model file associated with the secondary model.

image_type

• Values: full, grey, roi | Default: full
Process full color image, the full grey image or just the region of interest(roi).

rotate

• Values: Integer | Default: 0
Rotation of image when being processed through secondary detection model.

params_file

• Values: String | Default: Not Defined
Full path and file name for a file containing the params listed one per line.

noise_level

• Values: 1 - 255 | Default: 32
The minimum amount of change in a single pixel before it is counted towards the threshold value.

noise_tune

• Values: on, off | Default: on
Continuously adjust the noise_level parameter.

despeckle_filter

• Values: Combinations of E,e,D,d and l | Default: Not defined
Despeckle the image using combinations of (E/e)rode or (D/d)ilate. And ending with optional (l)abeling. This reduces noise in the motion image. Adding a trailing l enables labeling in which only the largest section section is used to calculate the threshold. Typical value is EedDl

area_detect

• Values: String | Default: Not defined
Detect motion in predefined areas (1 - 9) and when Motion is detected in the area, execute the script. This option is only to execute the on_area_detect script.
Areas are numbered like
• 1 2 3
• 4 5 6
• 7 8 9

mask_file

• Values: String | Default: Not defined
The full path and filename for the masking pgm file. If needed, the mask will be resized to match the width and height of the image. The areas in the mask file colored black will be excluded from motion detection. Shades of grey on the mask will diminish the detection while areas of white will not have any impact on motion detection.

mask_privacy

• Values: String | Default: Not defined
The full path and filename for the privacy masking pgm file. This mask completely removes the indicated sections of the image.

smart_mask_speed

• Values: 0 - 10 | Default: 0
The smartmask is intended to be a dynamic, self-learning mask to decrease sensitivity in areas with frequent motion. The speed specified by this parameter is how quickly the mask gets adjusted. Zero disables the smart mask

lightswitch_percent

• Values: 0 - 100 | Default: 0
The minimum change in the portion of the image that will trigger a lightswitch condition

lightswitch_frames

• Values: Integer | Default: 5
The number of frames to ignore when the lightswitch condition is triggered (see above).

minimum_motion_frames

• Values: Integer | Default: 1
The number of frames that must contain motion in order to trigger an event.

event_gap

• Values: Integer | Default: 60
The seconds of no motion detection that triggers the end of an event.

pre_capture

• Values: Integer | Default: 0
The number of pre-captured (buffered) frames to be captured before an event.

post_capture

• Values: Integer | Default: 0
The number of frames to be captured after an event has ended.

static_object_time

• Values: Integer | Default:
Number of seconds before a new object is included in the reference image.

Script Execution

on_event_start

• Values: String | Default: Not defined
The full path and file name of the program/script to be executed at the start of an event.

on_event_end

• Values: String | Default: Not defined
The full path and file name of the program/script to be executed at the end of an event.

on_picture_save

• Values: String | Default: Not defined
The full path and file name of the program/script to be executed when a picture is saved.

on_motion_detected

• Values: String | Default: Not defined
The full path and file name of the program/script to be executed when motion is detected.

on_area_detected

• Values: String | Default: Not defined
The full path and file name of the program/script to be executed when motion is detected in the area specified.

on_movie_start

• Values: String | Default: Not defined
The full path and file name of the program/script to be executed at the creation of a movie.

on_movie_end

• Values: String | Default: Not defined
The full path and file name of the program/script to be executed when a movie ends.

on_camera_lost

• Values: String | Default: Not defined
The full path and file name of the program/script to be executed when the camera is no longer detected.

on_camera_found

• Values: String | Default: Not defined
The full path and file name of the program/script to be executed when a previously lost camera is active again.

on_secondary_detect

• Values: String | Default: Not Defined
The full path and file name of the program/script to be executed when secondary detection occurs.

on_action_user

• Values: String | Default: Not Defined
The full path and file name of the program/script to be executed when user selects the user action from the web interface.

on_sound_alert

• Values: String | Default: Not Defined
The full path and file name of the program/script to be executed when a sound alert is triggered.

Output - Picture Options

picture_output

• Values: on, off, first, best | Default: off
'on' saves all motion images during an event. 'first' saves only the first image that detected motion. 'best' saves image with most changed pixels.

picture_output_motion

• Values: on, off | Default: off
Save the motion(debug) pictures with the pixels that change as a graytone image. If labeling is enabled via the despeckele option, the largest area will be blue and areas in red are those determined by the smartmask option.

picture_type

• Values: jpeg, webp, ppm | Default: jpeg
The type of picture file to output.

picture_quality

• Values: 1 - 100 | Default: 75
The image quality for the jpeg or webp images in percent. The value of 1 is worst and 100 is best.

picture_exif

• Values: String | Default: Not defined
The text for the JPEG EXIF comment with the EXIF timestamp.

picture_filename

• Values: String | Default: %v-%Y%m%d%H%M%S-%q
The file name and optionally the path for the pictures relative to target_dir. The file extension will be added based upon the picture_type.

snapshot_interval

• Values: Integer | Default: 0
The number of seconds between snapshots

snapshot_filename

• Values: String | Default: %v-%Y%m%d%H%M%S-snapshot
The file name and optionally the path for the snapshots relative to target_dir. The file extension is automatically added. A symbolic link called lastsnap.jpg is created in the target_dir and will always point to the latest snapshot, unless snapshot_filename is exactly 'lastsnap'

Output - Movie Options

movie_output

• Values: on, off | Default: on
Encode movies of the motion events.

movie_output_motion

• Values: on, off | Default: off
Encode movies that show the pixels that changed. If labeling is enabled via the despeckle option, the largest area will be in blue. If smartmask is enabled it will be shown in red. The filename will be the same as normal movies except with an 'm' appended.

movie_max_time

• Values: Integer | Default: 120
The maximum length of a movie in seconds. Set this to zero for unlimited length.

movie_bps

• Values: Integer | Default: 400000
Bitrate to use in encoding of movies. This option is ignored if movie_quality is specified.

movie_quality

• Values: 0 - 100 | Default: 60
A value of 0 disables this option while values 1 - 100 change the quality of the movie. The value of 1 means worst quality and 100 is the best quality. High values of this option (e.g. 100) may cause difficulty with some players.

movie_container

• Values: flv, ogg, webm, mp4, mkv, hevc, mov | Default: mkv
Container/Codec to be used for the video. Preferred codec can be appended e.g. mkv:libx265

movie_retain

• Values: on, off | Default: off
Retain movie only if the secondary detection occurred.

movie_passthrough

• Values: on, off | Default: off
When using a RTSP, RTMP, mjpeg and some V4l2 cameras, create movie files with the packets obtained directly from the camera.

movie_filename

• Values: String | Default: %v-%Y%m%d%H%M%S
The file name and optionally the path for the movie relative to target_dir. The file extension is automatically added based upon the container.

movie_extpipe_use

• Values: on, off | Default: off
Specifies whether to send the pictures to pipe for external encoding into a movie.

movie_extpipe

• Values: String | Default: Not defined
The program name and options for processing the images.

timelapse_interval

• Values: Integer | Default: 0
Interval in seconds for saving a picture into timelapse movie. Zero disables timelapse.

timelapse_mode

• Values: hourly, daily, weekly-sunday, weekly-monday, monthly, manual | Default: daily
File rollover mode of the timelapse video.

timelapse_fps

• Values: Integer | Default: 30
The frame per second rate to use in the playback of the timelapse video.

timelapse_container

• Values: mpg, mpeg4 | Default: mpg
Container to be used by timelapse video.
• mpg - Creates mpg file with mpeg-2 encoding. If MotionPlus is shutdown and restarted, new pictures will be appended to any previously created file with name indicated for timelapse.
• mpeg4 - Creates avi file with the default encoding. If MotionPlus is shutdown and restarted, new pictures will create a new file with the name indicated for timelapse.

timelapse_filename

• Values: String | Default: %Y%m%d-timelapse
The file name and optionally the path for the timelapse movies relative to target_dir. The file extension is automatically added based upon the container.

Output - Pipe Options

video_pipe

• Values: String | Default: Not defined
The video4linux video loopback device for normal images. The device would be specified in the format like /dev/video1

video_pipe_motion

• Values: String | Default: Not defined
The video4linux video loopback device for motion images. The device would be specified in the format like /dev/video1

Web Control

These options must be placed in the motionplus.conf file and not in a camera config files.

webcontrol_port

• Values: 0 to 65535 | Default: 0 (disabled)
The port number for the web based control of MotionPlus.

webcontrol_port

• Values: 0 to 65535 | Default: 0 (disabled)
Second port for the web control that does not use TLS. This allows for specifying one port that provides a TLS connection (to be used externally) while this port serves the local lan without getting certificate domain warnings.

webcontrol_ipv6

• Values: on, off | Default: off
Listen for connections from IPv6 and IPV4.

webcontrol_localhost

• Values: on, off | Default: on
Restrict the webcontrol of MotionPlus to the localhost.

webcontrol_base_path

• Values: Valid url path | Default: Not Defined
Specify new base url path for the webcontrol.

webcontrol_parms

• Values: 0 - 3 | Default: 0
Set the type of parameters that can be accessed via the webcontrol page.
• 0: None - No configuration parameters or actions will be available.
• 1: Limited- A limited list of parameters will be available.
• 2: Advanced - The advanced list of parameters will be available. These typically require MotionPlus to be restarted to become effective.
• 3: Restricted - User IDs, passwords and "on_" commands.
The default for this parameter is 0 (none) to enhance the security of the web interface. The setting of the webcontrol_parms is not included on the web interface and this parameter can only be specified via the configuration file.
Once MotionPlus has been configured, it is advised to complete the setup by setting this value to zero.

webcontrol_interface

• Values: `default` or `user` | Default: `default`
The type of webcontrol interface to provide.
• The value of `default` provides a traditional web page interface using html/css.
• The value of `user` means the html will be provided by file specified in webcontrol_html

webcontrol_auth_method

• Values: none, basic, digest | Default: none
Authentication method to use for the webcontrol port

webcontrol_authentication

• Values: String | Default: Not defined
The username and password specified as username:password

webcontrol_tls

• Values: on, off | Default: off
Enable SSL/TLS (https) for the webcontrol.

webcontrol_cert

• Values: String | Default: Not defined
Full path and file name to the certification file for SSL/TLS support. Only used when webcontrol_tls is enabled.

webcontrol_key

• Values: String | Default: Not defined
Full path and file name to the key file for SSL/TLS support. Only used when webcontrol_tls is enabled.

webcontrol_headers

• Values: String | Default: Not defined
Comma separated list of headers=values for the webcontrol. Use Access-Control-Allow-Origin header to specify the CORS header.

webcontrol_actions

• Values: String | Default: Not defined
Comma separated list of the actions=values to allow and show on the web control page. The following parameters are recognized.
• pause: Applies for both Pause and Unpause actions
• event: Applies for both Start Event and End Event actions
• snapshot
• camera_add
• camera_delete
• ptz: Applies for all PTZ commands
• stop
• restart
• action_user
• config_write
• config: Applies for any and all configuration parameters
• movies: Show page of recorded movies on webcontrol for downloading (requires database functionality)
Specify each of these using values of `on` or `off` to permit or deny respectively. The specification in this parameter will override the default that is associated with webcontrol_parms.

webcontrol_html

• Values: String | Default: Not defined
The full path and file name for a user specified html page to use as the webcontrol.

webcontrol_lock_attempt

• Values: Integer | Default: 3
Number of permitted attempts to log in before triggering lockout.

webcontrol_lock_minutes

• Values: Integer | Default: 10
Number of minutes that the IP will be locked out from further attempts to log in.

webcontrol_lock_script

• Values: String | Default: Not Defined
Script to execute when a lockout has been triggered. Two additional parameters are passed to this script when executed. The number of times the userid failed as well as the IP address attempting to log in.

Live Stream

stream_preview_scale

• Values: Integer | Default: 25
The percentage to scale the stream image when it is placed on the webcontrol page. Numbers greater than 100 are permitted.

stream_preview_newline

• Values: on, off | Default: off
Insert a new line indicator prior to the image on the webcontrol web page.

stream_preview_method

• Values: `mjpg`, `static` | Default: `mjpg`
This option determines the method used for displaying images on the webcontrol page. Use `static` to get around browser limits on the concurrent number connections to server.

stream_preview_ptz

• Values: on, off | Default: on
Include the PTZ buttons on the webcontrol page.

stream_quality

• Values: 1 - 100 | Default: 50
JPG compression quality setting in percent for the images transferred to live stream.

stream_grey

• Values: on, off | Default: off
Send the live stream in grey rather than color.

stream_maxrate

• Values: Integer | Default: 1
The frames per second for the webcontrol camera stream.

stream_motion

• Values: on, off | Default: off
Limit the frames per second for the webcontrol stream to 1 when there is no motion being detected and increase to the stream_maxrate when there is motion.

stream_scan_time

• Values: Integer | Default: 5
Time in seconds to display image when in scan mode.

stream_scan_scale

• Values: Integer | Default: 25
Percentage scaling factor to apply on the image when in scan mode.

Database

Only one database can be used by MotionPlus at a time. These options must be placed in the motionplus.conf file and not in a camera config files.

database_type

• Values: mariadb, postgresql, sqlite3 | Default: Not defined
The database type.

database_dbname

• Values: String | Default: Not defined
The full path and file name to the Sqlite3 database.

database_host

• Values: String | Default: localhost
The host on which the database is located

database_port

• Values: 0 - 65535 | Default: 0
The port number that is used for the database. Typical values are: MariaDB=3306 and postgresql=5432

database_user

• Values: String | Default: Not defined
The user account name for database

database_password

• Values: String | Default: Not defined
The user password for database

database_busy_timeout

• Values: Integer | Default: 0
The time to wait before issuing a timeout message for sqlite3.

sql_event_end

• Values: String | Default:
SQL query to execute at the end of the event.

sql_event_start

• Values: String | Default:
SQL query to execute at the start of the event.

sql_movie_end

• Values: String | Default:
SQL query to execute at the end of the movie.

sql_movie_start

• Values: String | Default:
SQL query to execute at the start of the movie.

sql_pic_save

• Values: String | Default:
SQL query to execute when a picture has been saved.

Tracking

ptz_auto_track

• Values: on,off Default: off
Enable automatic tracking.

ptz_wait

• Values: Integer | Default: 0
Time in seconds to wait after a PTZ script is called before resuming motion detection.

ptz_move_track

• Values: String | Default: Not Defined
Full path and file name for script to execute for auto tracking.

ptz_pan_left

• Values: String | Default: Not Defined
Full path and file name for script to pan the camera left.

ptz_pan_right

• Values: String | Default: Not Defined
Full path and file name for script to pan the camera right.

ptz_tilt_up

• Values: String | Default:
Full path and file name for script to tilt the camera up.

ptz_tilt_down

• Values: String | Default: Not Defined
Full path and file name for script to tilt the camera down.

ptz_zoom_in

• Values: String | Default: Not Defined
Full path and file name for script to zoom the camera in .

ptz_zoom_out

• Values: String | Default: Not Defined
Full path and file name for script to zoom the camera out.

Sound

snd_device

• Values: String | Default: Not Defined
String specifying the sound device.
For alsa use the format such as hw:1,0
For PulseAudio, usually leave this empty and let PulseAudio use the defaults. If a specific PulseAudio device string is known, specify using this parameter.

snd_params

• Values: String | Default: Not Defined
Comma separated list of configuration parameters for the sound device.

The configuration parameters for snd_device

source

• Values: String | Default: alsa
The type of source for the sound device. Currently supported sources are 'alsa' or 'pulse'.

channels

• Values: Integer: | Default: 1
The number of audio channels for the sound device

frames

• Values: Integer | Default: 2048
The number of bytes to read in for each frame from the sound device.

sample_rate

• Values: Integer | Default: 44100
The sample rate for the sound device.

pulse_server

• Values: String | Default: Not defined
The override name of the pulse server to use.

params_file

• Values: String | Default: Not Defined
Full path and file name for a file containing the params listed one per line.

snd_alerts

• Values: String | Default: Not Defined
Comma separated list of configuration parameters for the criteria of each alert.
Multiple specifications of this parameter are permitted.

The configuration parameters for each alert associated with the sound detection. Multiple alerts can be specified and each one can be set up to check for a different frequency. The following are the parameters that are specified on each alert.

alert_id

• Values: Integer | Default:
The unique number associated with the alert.

volume_level

• Values: Integer | Default: 0
The minimum volume level required to be start the detection process

volume_count

• Values: Integer | Default: 100
The minimum number of times that the frequency must be detected above the volume_level before triggering event.

freq_low

• Values: Float | Default: 0
The minimum frequency associated with the detection.

freq_high

• Values: Float | Default: 10000
The maximum frequency associated with the detection.

trigger_duration

• Values: Integer | Default: 10
The duration that must occur in seconds between triggered events before resetting. This prevents a perpetual stream of on_sound_event being triggered upon a constant sound. The sound frequency must not occur for at least trigger_duration seconds before a new on_sound_event is triggered for that particular alert.

trigger_threshold

• Values: Integer | Default: 10
The number of times that the alert must be triggered before invoking the on_sound_event

alert_nm

• Values: String | Default: Not defined
The description associated with the alert.

params_file

• Values: String | Default: Not Defined
Full path and file name for a file containing the params listed one per line.

snd_window

• Values: hamming, hann, none | Default: hamming
The sound frequency detection window function method to use.

snd_show

• Values: boolean | Default: off
Write to the log the frequencies being detected.

Command Line Options

motionplus [ -hbnsm ] [ -c config file path ] [ -d level ] [ -k level ] [ -p pid_file ] [ -l log_file ]
• -c : Full path and filename of config file.
• -h : Show help screen
• -b : Run in daemon mode
• -n : Run in non-daemon mode
• -s : Run in setup mode. Also forces non-daemon mode.
• -d : Run with message log level 1 - 9
• -k : Run with message log type 1 - 9
• -l : Full path and file name for log file
• -p : Full path and file name for the process id file
• -m : Start in pause mode

The Configuration Files

MotionPlus will search for the configuration file called 'motionplus.conf' in the following order:
1. Current directory where MotionPlus was invoked
2. The directory called '.motionplus' in the current users home directory
3. The directory defined by --sysconfdir=DIR during the configure step of installation. If this was not defined, it will default to /etc/motionplus
The motionplus.conf file specifies parameters for the entire MotionPlus application and defaults for each camera. Specifications that are unique to each camera are included in separate files.

Signals

A signal can be sent from the command line by typing e.g. kill -s SIGHUP pid, where the last parameter is the process ID for MotionPlus.

Signal	Description
SIGHUP	The config file will be reread.
SIGTERM	If needed MotionPlus will create an movie file of the last event and exit
SIGUSR1	MotionPlus will create an movie file of the current event.