這是用戶在 2025-6-4 24:05 為 https://app.immersivetranslate.com/pdf-pro/e0eb8a76-5340-47d7-8361-d1077ff85aa2/ 保存的雙語快照頁面,由 沉浸式翻譯 提供雙語支持。了解如何保存?
  報告贊助商   發行日期
PalmEco Tech Australia Pty Ltd
4/77 Connells Point Road
South Hurstville NSW 2221
PalmEco Tech Australia Pty Ltd 4/77 Connells Point Road South Hurstville NSW 2221| PalmEco Tech Australia Pty Ltd | | :---: | | 4/77 Connells Point Road | | South Hurstville NSW 2221 |
   28 th 28 th  28^("th ")28^{\text {th }} 2012年2月
Report Sponsor Issue Date "PalmEco Tech Australia Pty Ltd 4/77 Connells Point Road South Hurstville NSW 2221" 28^("th ") February 2012| Report Sponsor | Issue Date | | :---: | :---: | | PalmEco Tech Australia Pty Ltd <br> 4/77 Connells Point Road <br> South Hurstville NSW 2221 | $28^{\text {th }}$ February 2012 |
依據 AS 1530.1-1994 進行測試

  目的

旨在確定本報告所述材料樣品在下述測試標準所規定的測試條件下的性能表現。
  產品   PalmEco 防火板
  測試參考   參考日期
FNC10417    13 th 13 th  13^("th ")13{ }^{\text {th }} 2012年2月
  測試方法   補充標準
AS 1530.1-1994 第 1 部分:材料可燃性測試   
Product PalmEco Fire Board Test Reference Reference Date FNC10417 13^("th ") February 2012 Test Method Supplementary Standards AS 1530.1-1994 Part 1: Combustibility test for materials Nil| Product | PalmEco Fire Board | | :--- | :--- | | Test Reference | Reference Date | | FNC10417 | $13{ }^{\text {th }}$ February 2012 | | Test Method | Supplementary Standards | | AS 1530.1-1994 Part 1: Combustibility test for materials | Nil |

  產品描述

贊助商描述該材料為一種四層結構、厚度 12 毫米的板材,由氧化鎂、棕櫚纖維、氯化鎂、珍珠岩混合物組成,且在面板兩側表面附近各有兩層強化玻璃纖維網。各層由細鋼絲固定在一起。每層材料的名義厚度為 12 毫米,名義密度為 1100 kg / m 3 1100 kg / m 3 1100kg//m^(3)1100 \mathrm{~kg} / \mathrm{m}^{3} ,表面為米色且一側具有平滑表面。EWFA 人員未參與這些測試樣品的選擇或製備。在進行測試前,測試樣品在通風烘箱中於 60 ± 5 C 60 ± 5 C 60+-5^(@)C60 \pm 5^{\circ} \mathrm{C} 溫度下調節至少 20 小時且不超過 24 小時。測試前,樣品在乾燥器中冷卻至室溫。
  測試機構 Exova Warringtonfire Aus Pty Ltd
  地址 PO Box 4282 DANDENONG SOUTH VIC 3164 2 號單元,409-411 Hammond Road DANDENONG VIC 3175
  電話 / 傳真 61 (0)3 97671000 / 61 (0)3 97671001
ABN 81050241524
電子郵件 / 網頁 www.exova.com
  授權
製作人:J. D. Richardson、P. F. Motteram
Prepared By: J. D. Richardson. P. F. Motteram| Prepared By: | | :--- | | J. D. Richardson. | | P. F. Motteram |
TESTING AUTHORITY Exova Warringtonfire Aus Pty Ltd Address PO Box 4282 DANDENONG SOUTH VIC 3164 Unit 2, 409-411 Hammond Road DANDENONG VIC 3175 Phone / Fax 61 (0)3 97671000 / 61 (0)3 97671001 ABN 81050241524 Email / Home Page www.exova.com Authorisation "Prepared By: J. D. Richardson. P. F. Motteram"| TESTING AUTHORITY | Exova Warringtonfire Aus Pty Ltd | | :--- | :--- | | Address | PO Box 4282 DANDENONG SOUTH VIC 3164 Unit 2, 409-411 Hammond Road DANDENONG VIC 3175 | | Phone / Fax | 61 (0)3 97671000 / 61 (0)3 97671001 | | ABN | 81050241524 | | Email / Home Page | www.exova.com | | Authorisation | Prepared By: <br> J. D. Richardson. <br> P. F. Motteram |
  測試結果
平均爐溫升高 40.3 C 40.3 C 40.3^(@)C40.3^{\circ} \mathrm{C}
平均試樣中心熱電偶溫度升高 92.0 C 92.0 C 92.0^(@)C92.0^{\circ} \mathrm{C}
平均試樣表面熱電偶溫度升高 45.9 C 45.9 C 45.9^(@)C45.9^{\circ} \mathrm{C}
平均持續燃燒時間   0 秒
  平均質量損失 45.1%
可燃性標準
AS1530.1:1994 第 3.4 條款定義可燃材料為:持續燃燒時間(透過將所有樣品中持續燃燒時間達 5 秒或以上的個別燃燒時間相加後除以五計算)大於零,或爐內熱電偶的溫度升高算術平均值超過 50 C 50 C 50^(@)C50^{\circ} \mathrm{C} ,或試樣表面熱電偶的溫度升高算術平均值超過 50 C 50 C 50^(@)C50^{\circ} \mathrm{C}
  意見
測試於 2012 年 2 月 3 rd 3 rd  3^("rd ")3{ }^{\text {rd }} 日進行。根據 AS1530.1:1994 第 3.4 條款所規定的測試標準,該材料不被視為可燃。
Test Results Mean furnace temperature rise 40.3^(@)C Mean specimen centre thermocouple temperature rise 92.0^(@)C Mean specimen surface thermocouple temperature rise 45.9^(@)C Mean duration of sustained flaming 0 seconds Mean mass loss 45.1% Criteria of Combustibility Clause 3.4 of AS1530.1:1994 defines a combustible material as one for which; the duration of sustained flaming, as determined by summing the individual durations of flaming of 5 seconds or longer for all of the samples and dividing by five, is greater than zero, or the arithmetic mean of the temperature rise of the furnace thermocouple exceeds 50^(@)C or the arithmetic mean of the specimen surface thermocouple temperature rise exceeds 50^(@)C. Comments The tests were conducted on February 3^("rd ") 2012. The material is NOT deemed COMBUSTIBLE according to the test criteria specified in Clause 3.4 of AS1530.1:1994 | Test Results | | | :--- | :--- | | Mean furnace temperature rise | $40.3^{\circ} \mathrm{C}$ | | Mean specimen centre thermocouple temperature rise | $92.0^{\circ} \mathrm{C}$ | | Mean specimen surface thermocouple temperature rise | $45.9^{\circ} \mathrm{C}$ | | Mean duration of sustained flaming | 0 seconds | | Mean mass loss | 45.1% | | Criteria of Combustibility | | | Clause 3.4 of AS1530.1:1994 defines a combustible material as one for which; the duration of sustained flaming, as determined by summing the individual durations of flaming of 5 seconds or longer for all of the samples and dividing by five, is greater than zero, or the arithmetic mean of the temperature rise of the furnace thermocouple exceeds $50^{\circ} \mathrm{C}$ or the arithmetic mean of the specimen surface thermocouple temperature rise exceeds $50^{\circ} \mathrm{C}$. | | | Comments | | | The tests were conducted on February $3{ }^{\text {rd }}$ 2012. The material is NOT deemed COMBUSTIBLE according to the test criteria specified in Clause 3.4 of AS1530.1:1994 | |

  條件/有效性

本報告僅可完整複製。未經 Exova Warringtonfire Aus Pty Ltd 許可,不得發布摘錄或節錄內容。
這些測試已依照上述參考的測試標準進行,本報告應與該標準一併閱讀。
本測試報告並不代表 Exova Warringtonfire Aus Pty Ltd 對實際供應產品性能的認可。測試於 CSIRO 實驗室在 Exova Warringtonfire Aus Pty Ltd 的技術監控下進行。這些測試結果僅反映材料在測試條件下的行為,並非用於評估材料使用時潛在火災危害的唯一標準。