仪器功能概述：1-6个测量位，具有自动恒温、自动测量、数据处理等。
Overview of instrument functions: 1-6 measuring bits, with automatic constant temperature, automatic measurement, data processing, etc.

仪器结构
Instrument structure

本仪器为智能模块组合结构。它可根据用户不同的技术要求组合成最大限度满足用户需求的粘度测试仪器。每套主要由一台控制模块、1-6个测量模块及通讯线、一个恒温浴槽、一个温控模块、一台制冷模块、1-6根乌式粘度计、控制软件及PC机等组成。
This instrument is an intelligent module combination structure. It can be combined into a viscosity testing instrument that meets the needs of users to the greatest extent according to the different technical requirements of users. Each set is mainly composed of a control module, 1-6 measuring modules and communication lines, a thermostatic bath, a temperature control module, a refrigeration module, 1-6 black viscometers, control software and PC.

可扩展带自动清洗干燥功能。
Expandable with automatic washing and drying function.

IV-MC

控制模块
Control module

是系统的中央模块并同时实现PC机和各个组件之间的连接；
It is the central module of the system and realizes the connection between the PC and various components at the same time;

和测量模块及PC机通讯接口为USB接口，非常方便插拔；
The communication interface with the measurement module and PC is USB interface, which is very convenient to plug and unplug;

6通道控制系统，最多可满足6个测量台同时工作；
6-channel control system, up to 6 measuring stations can work at the same time;

IV

测量模块
Measurement module

装不同标准的毛细管粘度计，例如乌氏粘度计、品氏粘度计、微型奥氏粘度计；
Capillary viscometers with different standards, such as Ughns viscometer, Pint viscometer, micro austenitic viscometer;

具有自动恒温、提升样品、计时功能。和控制模块只需一根USB通讯线的连接；
It has the functions of automatic constant temperature, sample lifting and timing. It only needs a USB communication cable to connect with the control module;

采用进口提升泵及铠装不锈钢红外线光纤传感器；
Imported lifting pump and armored stainless steel infrared optical fiber sensor;  

适用温度范围：0～70℃；
Applicable temperature range: 0~70°C;

时间范围：0～9999.99s；
Time range: 0~9999.99s;

计时精度：0.01s；
Timing accuracy: 0.01s;

粘度范围：0.3～50000 mm²/s(取决于所使用的粘度计）；
Viscosity range: 0.3~50000 mm²/s (depending on the viscometer used);

HCT恒温浴槽及WK温控模块
HCT thermostatic bath and WK temperature control module

可放置1-6个测量模块；
1-6 measurement modules can be placed;

材质：不锈钢内外胆，双层钢化玻璃视窗；
Material: stainless steel inner and outer liner, double-layer tempered glass window;

采用顶置式耐腐蚀离心泵循环系统及双仓体设计结构，确保了浴槽测量区的浴液温度长期一致性及精度；
The overhead corrosion-resistant centrifugal pump circulation system and double chamber design structure are adopted to ensure the long-term consistency and accuracy of the bath temperature in the bath measurement area.

具有高低液位报警及保护功能；
It has the function of high and low liquid level alarm and protection;

浴槽温度范围：15～130℃；
Bath temperature range: 15~130°C;

温度波动度：≤±0.01℃（15-60℃）（配套制冷模块）；≤±0.03℃（60-130℃）；
Temperature fluctuation: ≤±0.01°C(15-60°C) (supporting refrigeration module); ≤±0.03℃（60-130℃）；

温度显示分辨率：0.01℃。
Temperature display resolution: 0.01°C.

温控模块操作屏：液晶触摸屏；
Temperature control module operation screen: LCD touch screen;

V1.0

控制操作软件
Control operating software

运动粘度、动力粘度、粘度比、粘数、比浓粘度、增比粘度、特性粘度、极性粘数、聚合度、粘均分子量等计算；
Calculation of kinematic viscosity, dynamic viscosity, viscosity ratio, viscosity number, specific concentration viscosity, increased viscosity, intrinsic viscosity, polar viscosity, polymerization, viscosity average molecular weight, etc.;

软件具有光纤光强灵敏度功能可调功能（根据样品透光度），满足不同颜色的牛顿流体测量。
The software has the function of adjusting the optical fiber light intensity sensitivity (according to the sample transmittance) to meet the measurement of Newtonian fluids of different colors.

具有测试时间超差补测/权限管理功能；
It has the function of test time out-of-tolerance make-up test/authority management;

具有结果查询、报表预览、长期结果分析统计、导出、连接打印机打印报表等功能；
It has functions such as result query, report preview, long-term result analysis and statistics, export, and printing report by connecting to a printer.

每个工位都采用独立操作界面控制；
Each station is controlled by an independent operation interface;

操作界面：中文或英文；
Operation interface: Chinese or English;

满足单点法/平行外推法测量；
Single-point method/parallel extrapolation method measurement is satisfied;

水、电、气等
Water, electricity, gas, etc

外部条件要求
External conditions require

220V伏,50赫兹,功率：1.5KW；
220V V, 50Hz, Power: 1.5KW;

该设备最好安放于通风橱内或通风罩下；
The equipment should be preferably placed in a fume hood or under a hood;

温度：-5至40℃，湿度 ≤75%RH（不结露）。
Temperature: -5 to 40°C, humidity ≤75%RH (non-condensing).

仪器功能概述：1-6个测量位，具有自动测量、自动清洗、自动干燥及数据处理等。
Instrument function overview: 1-6 measuring bits, with automatic measurement, automatic cleaning, automatic drying and data processing, etc.

仪器结构
Instrument structure

本仪器为智能模块组合结构。它可根据用户不同的技术要求组合成最大限度满足用户需求的粘度测试仪器。每套主要由一台控制模块、1-6个测量模块、1-6个清洗模块、一个恒温浴槽、一个温控模块、一台制冷模块、1-6根乌式粘度计、控制软件及PC机等组成。
This instrument is an intelligent module combination structure. It can be combined into a viscosity testing instrument that meets the needs of users to the greatest extent according to the different technical requirements of users. Each set is mainly composed of a control module, 1-6 measurement modules, 1-6 cleaning modules, and a thermostatic bathIt is composed of a temperature control module, a refrigeration module, 1-6 black viscometers, control software and PC。

1-6个工位的测量/排液/清洗/干燥硬件部分全部独立设计，确保了每个工位的独立性，可同时满足最多1-6种不同材料的粘度测量且避免发生系统性的故障。
The hardware parts of 1-6 stations for measurement/drainage/cleaning/drying are all designed independently, which ensures the independence of each station, and can meet the viscosity measurement of up to 1-6 different materials at the same time and avoid systematic failures.

HCT恒温浴槽及WK温控模块
HCT thermostatic bath and WK temperature control module

可放置1-6个测量模块；
1-6 measurement modules can be placed;

材质：不锈钢内外胆，双层钢化玻璃视窗；
Material: stainless steel inner and outer liner, double-layer tempered glass window;

采用顶置式耐腐蚀离心泵循环系统及双仓体设计结构，确保了浴槽测量区的浴液温度长期一致性及精度；
The overhead corrosion-resistant centrifugal pump circulation system and double chamber design structure are adopted to ensure the long-term consistency and accuracy of the bath temperature in the bath measurement area.

具有高低液位报警及保护功能；
It has the function of high and low liquid level alarm and protection;

浴槽温度范围：15～130℃；
Bath temperature range: 15~130°C;

温度波动度：≤±0.01℃（15-60℃）（配套制冷模块）；≤±0.03℃（60-130℃）；
Temperature fluctuation: ≤±0.01°C(15-60°C) (supporting refrigeration module); ≤±0.03℃（60-130℃）；

温度显示分辨率：0.01℃。
Temperature display resolution: 0.01°C.

温控模块操作屏：液晶触摸屏；
Temperature control module operation screen: LCD touch screen;

IV-MC

控制模块
Control module

是系统的中央模块并同时实现PC机和各个组件之间的连接；
It is the central module of the system and realizes the connection between the PC and various components at the same time;

和测量模块及PC机通讯接口为USB接口，非常方便插拔；
The communication interface with the measurement module and PC is USB interface, which is very convenient to plug and unplug;

6通道控制系统，最多可满足6个测量台同时工作。
The 6-channel control system can meet the needs of up to 6 measuring stations at the same time.

IV

测量模块
Measurement module

装不同标准的毛细管粘度计，例如乌氏粘度计、品氏粘度计、微型奥氏粘度计；
Capillary viscometers with different standards, such as Ughns viscometer, Pint viscometer, micro austenitic viscometer;

具有自动恒温、提升样品、计时功能。和控制模块只需一根USB通讯线的连接；
It has the functions of automatic constant temperature, sample lifting and timing. It only needs a USB communication cable to connect with the control module;

采用进口提升泵及铠装不锈钢红外线光纤传感器；
Imported lifting pump and armored stainless steel infrared optical fiber sensor;  

适用温度范围：0～70℃；
Applicable temperature range: 0~70°C;

时间范围：0～9999.99s；
Time range: 0~9999.99s;

计时精度：0.01s；
Timing accuracy: 0.01s;

粘度范围：0.3～50000 mm²/s(取决于所使用的粘度计）；
Viscosity range: 0.3~50000 mm²/s (depending on the viscometer used);

SCL

清洗模块
Cleaning module

具有排液、清洗、干燥功能；
It has the functions of liquid drainage, cleaning and drying;

每个自动清洗模块都带一个独立的排液泵，废液收集各自独立（可选配每个位废液分开收集功能）；
Each automatic cleaning module has an independent drain pump, and the waste liquid is collected independently (each position can be equipped with a separate waste collection function);

清洗及干燥方式：来回往复多次清洗，双气路干燥；
Cleaning and drying method: back and forth cleaning for many times, double air path drying;

测量模块与清洗模块采用分体式设计且采用一对一的方式；
The measurement module and the cleaning module are designed separately and in a one-to-one manner;

试剂量：＜13ml。
Reagent volume: <13ml.

V1.0

控制操作软件
Control operating software

运动粘度、动力粘度、粘度比、粘数、比浓粘度、增比粘度、特性粘度、极性粘数、聚合度、粘均分子量等计算；
Calculation of kinematic viscosity, dynamic viscosity, viscosity ratio, viscosity number, specific concentration viscosity, increased viscosity, intrinsic viscosity, polar viscosity, polymerization, viscosity average molecular weight, etc.;

软件具有光纤光强灵敏度功能可调功能（根据样品透光度），满足不同颜色的牛顿流体测量。
The software has the function of adjusting the optical fiber light intensity sensitivity (according to the sample transmittance) to meet the measurement of Newtonian fluids of different colors.

具有测试时间超差补测/权限管理功能；
It has the function of test time out-of-tolerance make-up test/authority management;

具有结果查询、报表预览、长期结果分析统计、导出、连接打印机打印报表等功能；
It has functions such as result query, report preview, long-term result analysis and statistics, export, and printing report by connecting to a printer.

每个工位都采用独立操作界面控制；
Each station is controlled by an independent operation interface;

操作界面：中文或英文；
Operation interface: Chinese or English;

满足单点法/平行外推法测量。
Single-point method/parallel extrapolation method measurement is satisfied.

水、电、气等
Water, electricity, gas, etc

外部条件要求
External conditions require

220V伏,50赫兹,功率：1.7KW；
220V V, 50 Hz, Power: 1.7KW;

该设备最好安放于通风橱内或通风罩下；
The equipment should be preferably placed in a fume hood or under a hood;

温度：-5至40℃，湿度 ≤75%RH（不结露）。
Temperature: -5 to 40°C, humidity ≤75%RH (non-condensing).

仪器功能概述：1-6个测量位，具有自动测量、自动清洗、自动干燥及数据处理等。
Instrument function overview: 1-6 measuring bits, with automatic measurement, automatic cleaning, automatic drying and data processing, etc.

仪器结构
Instrument structure

本仪器为智能模块组合结构。它可根据用户不同的技术要求组合成最大限度满足用户需求的粘度测试仪器。每套主要由一台控制模块、1-6个测量模块及通讯线、1-6个自动清洗模块、一个恒温浴槽、一个温控模块、一台制冷模块、1-6根乌式粘度计、控制软件及PC机等组成。
This instrument is an intelligent module combination structure. It can be combined into a viscosity testing instrument that meets the needs of users to the greatest extent according to the different technical requirements of users. Each set is mainly composed of a control module, 1-6 measurement modules and communication lines, 1-6 automatic cleaning modules, aThermostatic baths, a temperature control module, a refrigeration module, 1-6 black viscometers, control softwareand PCs.

仪器除温控部分外，其余1-6个工位的硬件部分（包括测量/排液/清洗干燥）全部独立设计，确保了每个工位的独立性，可同时满足最多1-6种不同材料的粘度测量且避免发生系统性的故障。
In addition to the temperature control part, the hardware part of the remaining 1-6 stations (including measurement/liquid discharge/cleaning and drying) is all independently designed to ensure the independence of each station, which can meet the viscosity measurement of up to 1-6 different materials at the same time and avoid systematic failures.

IV-MC（I）

控制模块
Control module

是系统的中央模块并同时实现PC机和各个组件之间的连接；
It is the central module of the system and realizes the connection between the PC and various components at the same time;

和测量模块及PC机通讯接口为USB接口，非常方便插拔；
The communication interface with the measurement module and PC is USB interface, which is very convenient to plug and unplug;

8通道控制系统，最多可满足8个测量台同时工作。
The 8-channel control system can meet the needs of up to 8 measuring stations working at the same time.

IV-X

测量模块及SIV小精灵测量模块
Measurement module and SIV pokemon measurement module

装不同标准的毛细管粘度计，例如乌氏粘度计、品氏粘度计、微型奥氏粘度计、品氏粘度计；
Capillary viscometers of different standards, such as Ughns viscometer, Pint viscometer, micro austenitic viscometer, Pint viscometer;

具有自动恒温、提升样品、计时功能。和控制模块只需一根USB通讯线的连接；
It has the functions of automatic constant temperature, sample lifting and timing. It only needs a USB communication cable to connect with the control module;

采用进口提升泵及铠装不锈钢红外线光纤传感器；
Imported lifting pump and armored stainless steel infrared optical fiber sensor;

适用温度范围：-10～165℃；
Applicable temperature range: -10~165°C;

测量时间范围：0～9999.99s；
Measurement time range: 0~9999.99s;

计时精度：＜0.01s；
Timing accuracy: <0.01s;

粘度范围：0.3～50000 mm²/s(取决于所使用的粘度计）。
Viscosity range: 0.3~50000 mm²/s (depending on the viscometer used).

CL-X

自动清洗模块
Automatic cleaning module

具有排液、清洗、干燥、浸泡功能；
It has the functions of draining, cleaning, drying and soaking;

清洗模块可独立作为单独设备使用，也可和测量模块连用实现在线清洗干燥等功能；
The cleaning module can be used as a separate device independently, or it can be used in conjunction with the measurement module to achieve on-line cleaning and drying.

每个自动清洗模块都带一个独立的排液泵，废液收集各自独立（可选配每个位废液分开收集功能）；
Each automatic cleaning module has an independent drain pump, and the waste liquid is collected independently (each position can be equipped with a separate waste collection function);

智能化废液处理提醒功能，防止废液的溢出；
Intelligent waste liquid treatment reminder function to prevent waste liquid overflow;

多通道全方位来回带压清洗方式，使得粘度计储液球/主测量管/放空管等每个部分都能清洗干净；
The multi-channel all-round round-trip pressure cleaning method makes each part of the viscometer reservoir/main measuring tube/venting tube clean;

独一无二的三气路干燥带温带压方式，在保证干燥效果及效率的前提下，可采用更环保的试剂进行干燥。
The unique three-way drying with temperature and pressure method can be dried with more environmentally friendly reagents under the premise of ensuring the drying effect and efficiency.

清洗程序：两种；
Cleaning procedures: two;

测量模块与清洗模块采用分体式设计且采用一对一的方式；
The measurement module and the cleaning module are designed separately and in a one-to-one manner;

试剂量：＜13ml（单次）。
Reagent volume: <13ml (single).

HT恒温浴槽及
HT thermostatic bath and

WK-X温控模块
WK-X temperature control module

可放置1-6个测量模块；
1-6 measurement modules can be placed;

材质：不锈钢内外胆，双层钢化玻璃视窗；
Material: stainless steel inner and outer liner, double-layer tempered glass window;

采用数显可调顶置式耐腐蚀离心泵循环系统及双仓体设计结构，确保了浴槽测量区的浴液温度长期一致性及精度；
The digital display adjustable overhead corrosion-resistant centrifugal pump circulation system and double-chamber design structure are used to ensure the long-term consistency and accuracy of the bath temperature in the bath measurement area.

具有高低液位报警及超高温保护功能；
It has the functions of high and low liquid level alarm and ultra-high temperature protection;

温控模块操作屏：液晶触摸屏；
Temperature control module operation screen: LCD touch screen;

浴槽温度范围：15～150℃；
Bath temperature range: 15~150°C;

温度波动度：≤±0.008℃（15-40℃）；≤±0.03℃（40-165℃）；
Temperature fluctuation: ≤±0.008 °C (15-40 °C); ≤±0.03℃（40-165℃）；

温度显示分辨率：0.001℃（15-165℃范围内）；
Temperature display resolution: 0.001 °C (range from 15 to 165 °C);

循环泵速数显可调：200-1900转/分钟。
Circulating pump speed digital display adjustable: 200-1900 rpm.

V1.0

控制操作软件
Control operating software

运动粘度、动力粘度、粘度比、粘数、比浓粘度、增比粘度、特性粘度、极性粘数、聚合度、粘均分子量等计算；
Calculation of kinematic viscosity, dynamic viscosity, viscosity ratio, viscosity number, specific concentration viscosity, increased viscosity, intrinsic viscosity, polar viscosity, polymerization, viscosity average molecular weight, etc.;

软件具有光纤光强灵敏度功能可调功能（根据样品透光度），满足不同颜色的牛顿流体测量。
The software has the function of adjusting the optical fiber light intensity sensitivity (according to the sample transmittance) to meet the measurement of Newtonian fluids of different colors.

具有测量超差补测、权限管理等功能；
It has the functions of measurement out-of-tolerance supplementary test, authority management and so on;

具有结果查询、报表预览、长期结果分析统计、导出、连接打印机打印报表等功能；
It has functions such as result query, report preview, long-term result analysis and statistics, export, and printing report by connecting to a printer.

每个工位都采用独立操作界面控制；
Each station is controlled by an independent operation interface;

操作界面：中文或英文；
Operation interface: Chinese or English;

满足单点法/平行外推法测量。
Single-point method/parallel extrapolation method measurement is satisfied.

水、电、气等
Water, electricity, gas, etc

外部条件要求
External conditions require

220V伏,50赫兹,功率：2.4KW；
220V V, 50Hz, Power: 2.4KW;

该设备最好安放于通风橱内或通风罩下；
The equipment should be preferably placed in a fume hood or under a hood;

温度：-5至40℃，湿度 ≤75%RH（不结露）。
Temperature: -5 to 40°C, humidity ≤75%RH (non-condensing).

仪器功能概述：1-6个测量位，加入溶液一键启动后，仪器自动完成恒温测量--自动进两种及以上清洗或干燥溶剂清洗--干燥数据处理整个测量，整个过程无需人为干预及操作。
Overview of instrument functions: 1-6 measuring positions, after adding the solution to start with one key, the instrument automatically completes the constant temperature measurement - automatically enters two or more cleaning or drying solvent cleaning - drying data processing The whole measurement does not require human intervention and operation.

仪器结构
Instrument structure

本仪器为智能模块组合结构。它可根据用户不同的技术要求组合成最大限度满足用户需求的粘度测试仪器。每套主要由一台控制模块、1-6个测量模块及通讯线、1-6个多功能辅助测量模块、一个恒温浴槽、一个温控模块、一台制冷模块、1-6根乌式粘度计、控制软件及PC机等组成。
This instrument is an intelligent module combination structure. It can be combined into a viscosity testing instrument that meets the needs of users to the greatest extent according to the different technical requirements of users. Each set is mainly composed of a control module, 1-6 measurement modules and communication lines, 1-6 multi-functional auxiliary measurement modules, and oneThermostatic bath, a temperature control module, a refrigeration module, 1-6 black viscometers, control software and PCand so on.

1-6个工位的测量/排液/清洗/干燥硬件部分全部独立设计，确保了每个工位的独立性，可同时满足最多1-6种不同材料的粘度测量且避免发生系统性的故障。
The hardware parts of 1-6 stations for measurement/drainage/cleaning/drying are all designed independently, which ensures the independence of each station, and can meet the viscosity measurement of up to 1-6 different materials at the same time and avoid systematic failures.

IV-MC（I）

控制模块
Control module

是系统的中央模块并同时实现PC机和各个组件之间的连接；
It is the central module of the system and realizes the connection between the PC and various components at the same time;

和测量模块及PC机通讯接口为USB接口，非常方便插拔；
The communication interface with the measurement module and PC is USB interface, which is very convenient to plug and unplug;

8通道控制系统，最多可满足8个测量台同时工作。
The 8-channel control system can meet the needs of up to 8 measuring stations working at the same time.

IV-X

测量模块及SIV小精灵测量模块
Measurement module and SIV pokemon measurement module

装不同标准的毛细管粘度计，例如乌氏粘度计、品氏粘度计、微型奥氏粘度计、品氏粘度计；
Capillary viscometers of different standards, such as Ughns viscometer, Pint viscometer, micro austenitic viscometer, Pint viscometer;

具有自动恒温、提升样品、计时功能。和控制模块只需一根USB通讯线的连接；
It has the functions of automatic constant temperature, sample lifting and timing. It only needs a USB communication cable to connect with the control module;

采用进口提升泵及铠装不锈钢红外线光纤传感器；
Imported lifting pump and armored stainless steel infrared optical fiber sensor;

适用温度范围：-10～150℃；
Applicable temperature range: -10~150°C;

测量时间范围：0～9999.99s；
Measurement time range: 0~9999.99s;

计时精度：＜0.01s；
Timing accuracy: <0.01s;

粘度范围：0.3～50000 mm²/s(取决于所使用的粘度计）。
Viscosity range: 0.3~50000 mm²/s (depending on the viscometer used).

ACL

多功能辅助测量模块
Multifunctional auxiliary measurement module

具有排液、自动进液清洗、自动进液干燥、浸泡功能；
It has the functions of liquid discharge, automatic liquid feed cleaning, automatic liquid feed drying, and soaking;

辅助测量模块可独立作为单独设备使用，也可和测量模块连用实现在线清洗干燥等功能；
The auxiliary measurement module can be used as a separate device independently, or it can be used in conjunction with the measurement module to achieve on-line cleaning and drying.

每个多功能辅助测量模块都带一个独立的排液泵，废液收集各自独立（可选配每个位废液分开收集功能）；
Each multifunctional auxiliary measuring module is equipped with an independent drain pump for independent waste collection (optionally separate collection of waste at each position);

智能化废液处理提醒功能，防止废液的溢出；
Intelligent waste liquid treatment reminder function to prevent waste liquid overflow;

多通道全方位来回带压清洗方式，使得粘度计储液球/主测量管/放空管等每个部分都能清洗干净；
The multi-channel all-round round-trip pressure cleaning method makes each part of the viscometer reservoir/main measuring tube/venting tube clean;

独一无二的三气路干燥带温带压方式，在保证干燥效果及效率的前提下，可采用更环保的试剂进行干燥。
The unique three-way drying with temperature and pressure method can be dried with more environmentally friendly reagents under the premise of ensuring the drying effect and efficiency.

清洗程序：两种；
Cleaning procedures: two;

测量模块与辅助测量模块采用分体式设计且采用一对一的方式，且只需要两根气管连接；
The measurement module and the auxiliary measurement module adopt a split design and adopt a one-to-one method, and only two trachea pipes are connected;

试剂量：＜13ml（单次）。
Reagent volume: <13ml (single).

HT恒温浴槽及
HT thermostatic bath and

WK-X温控模块
WK-X temperature control module

可放置1-6个测量模块；
1-6 measurement modules can be placed;

材质：不锈钢内外胆，双层钢化玻璃视窗；
Material: stainless steel inner and outer liner, double-layer tempered glass window;

采用数显可调顶置式耐腐蚀离心泵循环系统及双仓体设计结构，确保了浴槽测量区的浴液温度长期一致性及精度；
The digital display adjustable overhead corrosion-resistant centrifugal pump circulation system and double-chamber design structure are used to ensure the long-term consistency and accuracy of the bath temperature in the bath measurement area.

具有高低液位报警及超高温保护功能；
It has the functions of high and low liquid level alarm and ultra-high temperature protection;

温控模块操作屏：液晶触摸屏；
Temperature control module operation screen: LCD touch screen;

浴槽温度范围：15～165℃；
Bath temperature range: 15~165°C;

温度波动度：≤±0.008℃（15-40℃）；≤±0.03℃（40-165℃）；
Temperature fluctuation: ≤±0.008 °C (15-40 °C); ≤±0.03℃（40-165℃）；

温度显示分辨率：0.001℃（15-165℃范围内）；
Temperature display resolution: 0.001 °C (range from 15 to 165 °C);

循环泵速数显可调：200-1900转/分钟。
Circulating pump speed digital display adjustable: 200-1900 rpm.

V1.0

卓祥自动粘度多功能测量软件
Joyce automatic viscosity multi-function measurement software

运动粘度、动力粘度、粘度比、粘数、比浓粘度、增比粘度、特性粘度、极性粘数、聚合度、粘均分子量等计算；
Calculation of kinematic viscosity, dynamic viscosity, viscosity ratio, viscosity number, specific concentration viscosity, increased viscosity, intrinsic viscosity, polar viscosity, polymerization, viscosity average molecular weight, etc.;

软件具有光纤光强灵敏度功能可调功能（根据样品透光度），满足不同颜色的牛顿流体测量。
The software has the function of adjusting the optical fiber light intensity sensitivity (according to the sample transmittance) to meet the measurement of Newtonian fluids of different colors.

具有测量超差补测、权限管理等功能；
It has the functions of measurement out-of-tolerance supplementary test, authority management and so on;

具有结果查询、报表预览、长期结果分析统计、导出、连接打印机打印报表等功能；
It has functions such as result query, report preview, long-term result analysis and statistics, export, and printing report by connecting to a printer.

每个工位都采用独立操作界面控制；
Each station is controlled by an independent operation interface;

操作界面：中英文可选；
Operation interface: Chinese and English optional;

满足单点法/平行外推法测量；
Single-point method/parallel extrapolation method measurement is satisfied;

可扩展同一根粘度管多浓度点稀释自动测量功能。
The automatic measurement of multi-concentration spot dilution in the same viscosity tube can be extended.

水、电、气等
Water, electricity, gas, etc

外部条件要求
External conditions require

220V伏,50赫兹,功率：2.4KW；
220V V, 50Hz, Power: 2.4KW;

该设备最好安放于通风橱内或通风罩下；
The equipment should be preferably placed in a fume hood or under a hood;

温度：-5至40℃，湿度 ≤75%RH（不结露）。
Temperature: -5 to 40°C, humidity ≤75%RH (non-condensing).